May 12, 2019 at 23:21 #26876
The folding forklifts for installation and the loading mechanism
The folding forklifts for installation is a piece of special equipment for transportation and installation inside the cutting hole, after the fully mechanized coal mining hydraulic support’s assembling.
This equipment will transport the hydraulic support to the designated position and install it by towing it with the winch.
This equipment changes the old operating way of assembling, which is directly pulling the support on floor bracket by winch.
Hydraulic control operating system is easily operated and much faster, safe, reliable and highly efficient.
There are two ways to transfer the hydraulic support from the flat transportation car to Folding mounted forklift at the two right triangle points:
One is that getting on the flat transportation car from the front of the forklift by the square assembly.
One is from the side of the forklift by installing the loading mechanism on the side of the car.
Getting on the forklift from the front needs more chamber space of the winch at the triangular point, so it’s suitable for better conditions of the mine.
It reduces the area of floor space that the forklift takes at the triangular point, when getting on the forklift from the sides, the chamber’s space of the winch is smaller at the triangular point, so it needs to install the loading mechanism to be completed.
Folding Forklifts for Installation and Loading Mechanism for Coal Mining Under the Ground
Basic Parameter of Folding Forklifts for Installation
Items of technical performance Parameter Values
External dimension (Length x Width x Height) （4250×2500×1000）±50mm
Inside mine dimension (Length x Width x Height) （3950×1300×1300）±50mm
Load Rating 50t
Gauge gauge 2100mm
Horizontal rotation angles 90°
Lifting height of rotating disk 20mm
Size of hauling chain φ22×66mm
Rated hydraulic offering pressure 31.5 MPa
Whole weight 9500kg
Basic Parameter of Loading Mechanism Items of technical performance Parameter Values
External dimension (Length x Width x Height) （3600×1540×1000）±50mm
Max working dimension (Length x Width x Height) （3000×3050×1110）±50mm
rated load 50t
Size of hauling chain 22×66mm
Rated working pressure 31.5MPa
Whole weight 4500kg China Installation Equipment Of Fully Mechanized Coal Mining Face Under The Ground manufacturers
You must be logged in to reply to this topic.